Network Scanning: Concerns and Countermeasures
Network Scanning Concerns and Countermeasures
Daniel Saucier (Student of the InfoSec Industry, March 2012) – Network vulnerability scanning can not be more important than it is, right now in this day and age of internet computing. As technology grows the architectures are not catching up quite as fast as most would like. This article written below assumes you have basic networking knowledge, and assumes no responsibility for actions taken from this article. It’s sole purpose is to educate the savvy portion of the internet community with different protection types and threat preventive measures for today’s networking environments.
Different IP network scanning methods allow you to test and effectively identify vulnerable network components. Here is a list of effective scanning techniques and there applications: These options can be found in most advanced configuration options on most downloadable network scanners.
ICMP scanning and Probing:
>| By launching an ICMP ping sweep, you can effectively identified poorly protected hosts ( as security conscious administrator such as myself, filter inbound ICMP messages) and perform a degree of OS fingerprinting and reconnaissance by analyzing responses to the ICMP probe.
Half-open SYN flag TCP port scanning:
>| A SYN port scan is often the most effective type of port scan to launch directly against a target IP network space. SYN scanning is very fast, which allows large networks to be scanned rather quickly.
Inverse TCP port scanning:
>| Inverse scanning types (particularly FIN, XMAS, and NULL) take advantage of idiosyncrasies in certain TCP/IP stack implementations. This scanning type is not useful for large networks. Use this scan type for testing individual host or small network segments‘ security. Make sure your code is as up to date as possible and apply any manual workarounds to protect gear from this type of scan. Some if not all of these type of scans identify weak components because of the cost of business.
Third-party TCP port scanning:
>| Using a combination of vulnerable network components and TCP spoofing, third-party TCP port scans can be effectively launched. Scanning in this fashion has two benenfits: hiding the true source of the TCP scan and assessing the filters and levels of trust between hosts. Although time-consuming to undertake, this can be proved to be very effective when applied correctly.
UDP port scanning:
>| Identifying accessible UDP services can be undertaken easily, only if ICMP type 3 Code 3 (“Destination port unreachable”) messages are allowed back through filtering mechanisms that protect target systems. UDP services can sometimes be used to gather useful data or directly compromise hosts (the DNS, SNMP, TFTP, and BOOTP services in particular). Make sure you are locking these down!!
IDS evasion and filter circumvention:
>| Intrusion detection systems and other security mechanisms can be rendered ineffective by using multiple spoofed decoy hosts when scanning or by fragmenting probe packets using Nmap or fragroute. Filters such as firewalls, routers, and even software (IPsec) can sometimes be bypassed using specific source TCP or UDP port, source routing, or stateful attacks.
Using the different scanning methods mentioned above you can harden you network pretty well, however. Change is always a factor, what if you need to undertake a major network overhaul and start exposing different types of protocols to the network. The following list will help you when considering modifications to your components and minimize risk of re-exposing vulnerable services.
>| This list could be used as a baseline, guideline in some cases on any network configuration.
- Filter inbound ICMP message types at the border, or perimeter if you DMZ any servers on any routers and firewalls. This will force an attackers to use full-blown out TCP scans against all of your IP addresses to map effectively.
- Filter all outbound ICMP type 3 “unreachable” messages at the edge routers and firewalls to prevent UDP port scanning and firewalking from being effective. Firewalking – process of identifying firewalls in the scanning enumerations
- Consider configuring Internet firewalls so they can identify ports scans and throttle the connections accordingly. You can configure such as Check Point, NetScreen, and Watchguard appliances to name a few to prevent fast port scans and SYN floods from being launched against your network. However, this can back fire if the attacker is using a spoofed source address, resulting in DoS. PortSentry as an Open Source option is pretty effective as well in identifying scanns against your network.
- Asses the way that your network firewall or IDS devices handle fragmented IP packets by using tools such as fragtest and fragroute. Such devices can be taken down by being flooded with high volumes of fragments being processed. Bring your findings to the vendors attention……
- Ensure that your routing and filtering appliances (both routers and firewalls) can’t be bypassed using specific source ports or source routing techniques.
- If you run FTP services; ensure that your firewalls aren’t vulnerable to stateful circumvention attacks relating to malformed PORT and PASV commands
- If a commercial firewall is being used, ensure the following:
- Latest code is installed, consider replacement is you can not comply
- Antispoofing rules have been correctly defined so that the device doesn’t accept packets with private spoofed source addresses on its external interfaces
8. Investigate the use of reverse proxy services if high security is a must. Fragments and malforms are not getting by these guys, thus mitigating low level recon.
Wrapping up this article I would like to mention; be aware of your own network configurations and its publicly accessible ports by launching TCP and UDP port scans along with ICMP probes against your own IP address space. It really is surprising how many companies large and small still do not undertake proper scanning exercises.
This entry was posted on March 11, 2012 by NetSecurityIT. It was filed under Enterprise, General Security, Hacking, Network Management, network management security, Network Security, Network Security News, network security solution, network security tool, Networking, Originals, Patching, Privacy, Security, Security Advisory, Vulnerabilities, Wireless Security, Zero-Day and was tagged with enterprise-it, Information security, Internet Control Message Protocol, Internet Protocol Suite, Intrusion detection system, IP address, IPSec, Port scanner, software, syn port scan, TCP, tcp ip stack, Technology, Transmission Control Protocol, UDP, User Datagram Protocol, virtualization.